MONOCROMEX one coat Natural Lime Render
A ready mixed mortar based on Natural Hydraulic lime specially formulated to achieve fast application/finishing time, good waterproofing, low capillarity, high breathability, elasticity and vibrant coloured finishes. Substantial savings in cost of painting and maintenance.
|Technical data||Test std. CSTB & EN/BS 998.1|
|Dry Density (hardened product)||1450g.l +/100g/l||Meruc M 4|
|Elasticity moduli 28days||Between 4000 and 6000 MPa||Meruc E 3|
|Compressive strength 28 days||Between 4 and 6 N/mm2||CSTB|
|Flexural strength 28days||Between 2 and 2,5 N/mm2||Meruc R 4|
|Water retention (on paste)||94% (± 2%)||Meruc U 4|
(0.772 g x m2 x h x mmHg)
|Capillarity||Between 1 and 2.5 g/dm2.min1/2||Meruc C 2|
|Thermal conductivity||0.54 W/m.K||EN 1745|
|Fire resistance||Class A (all uses)|
|Granulometry:||TF 0 -1.3 mm
F 0 - 1.8 mm
M 0 - 2.5 mm
G 0 - 4.0 mm
Packing: in 30 kg. bags / 49 bags per pallet (1.47T)
See: COLOUR CHART
Application recommendations: on properly prepared background
offering adequate keying, cast on or spray on up to 10 mm in one pass
for floated finishes or 15 mm if a scratched finish is required. On waterproofed
or smooth backgrounds spray or cast on a 1st bonding coat of about 3
mm adding 500 grams of SBR per bag of product. Straighten the work immediately
after with an appropriate tool. Float (sponge, wooden or plastic) after
2-3 hours or more depending on weather conditions.
Not suitable for light weight cement blocks.
Do not work in temperatures below 5oC or above 30oC. Protect fresh mortar from rain, frost or strong drying wind. In hot weather, dampen the background adequately and cure the work by applying a light water mist several times for a period of 72 hours.
The above details are given for general information purposes and do not constitute a specification.
For further Guidance, contact your St Astier Distributor.